Minwax Stainable Wood Filler
- 6 oz container
- Latex formula, accepts oil and water-based Minwax stains
- 2 to 6 hours to dry, by patch depth
- Indoor and outdoor unfinished wood
- Water and rot resistant, soap and water cleanup
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A stainable, paintable latex wood filler for cracks, nail holes, gouges and knot holes in indoor and outdoor wood. Cure time depends on patch depth, so deep repairs need patience.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B000BPLXEQModel: 42852000Category: Wood Filler
Sizes Available
Need a different one? Pick on Amazon →
Overview
Minwax makes this sandable wood filler as a latex formula that takes all Minwax penetrating stains, oil or water based. A putty knife applies it to dry, clean unfinished wood, and a sanding block levels it flush after it dries.
The reason to buy is that the filler can be stained, not just painted, which matters on natural wood. It works on both indoor and outdoor surfaces. The limitation is drying time, which stretches with deeper patches, and the container is small for large repairs.
Who it's for
Trim carpenters and furniture finishers patching small defects in unfinished wood before staining. Larger structural repairs need a two-part filler, and users who dislike waiting should note the drying time.
Pros and cons
- Accepts Minwax oil and water-based stains
- Paintable as well
- Works indoors and outdoors
- Cleans up with soap and water
- Drying time depends on depth
- Natural color only
- Not for structural repair
Performance notes
Latex fillers dry as the water leaves, so a thin nail hole is ready sooner than a deep gouge. Once dry, sanding with a block gives a flush surface that the stain can penetrate, and the dry, clean surface prep recommended in the description helps adhesion.
Specifications
| Brand | Minwax |
|---|---|
| Model | 42852000 |
| Capacity & performance | |
| Volume | 6 oz |
| Construction & materials | |
| Material | Latex wood filler |
| Compatible material | Unfinished indoor and outdoor wood |
| Color | Natural |
| Other details | |
| Time to sandable | 2 to 6 hours |
| Style | Stainable |
| Special features | Water Resistant, Rot Resistant |
| Uses | Carpentry, Woodworking |
Frequently asked questions
How do I clean up Minwax wood filler?
The description says it cleans up easily with soap and water. Wipe tools and squeeze-out before it dries.
How do I apply Minwax stainable wood filler?
Make sure the wood is dry and clean, apply liberally with a putty knife, let dry for 2 to 6 hours depending on depth, then sand flush with a sanding block.
Can I stain over this Minwax filler?
Yes. It is formulated to accept all Minwax penetrating stains, including oil and water-based types, and it can also be painted.