Grizzly Industrial G0602 Benchtop Metal Lathe 10x22 in
- 9-1/2 inch swing over bed, sold as a 10 x 22
- 22 inches between centers
- 6-1/8 inch swing over cross slide
- 25mm spindle bore
- 1-3/4 inch x 8 TPI spindle thread
- 447 lb benchtop unit, 49.25 x 22.25 x 21.25 inches
- Inch and metric measurement system
Updated 20 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A compact benchtop metal lathe for small turning jobs in a home shop. The listing leaves out motor power, speed range and included tooling, so confirm those before buying.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B000M67TJ2Model: G0602Category: Metal Lathes
Overview
Unlike a floor lathe on its own stand, the Grizzly G0602 is a benchtop metal lathe that mounts on a strong bench or cabinet. Work spins on a threaded spindle nose, and a bore through the spindle lets slender stock pass into the headstock.
Compact capacity on a bench is the point, freeing floor space in a small shop. Its weight still demands a very strong bench and help to lift it into place. Motor, speeds and the accessory list are absent here, which leaves key comparison points unanswered.
Who it's for
Hobby machinists making small parts in a garage or basement shop, with a bench strong enough to carry the load, are the target. Shops that need long between-centers capacity or a full spec sheet before buying should look at a larger documented model.
Pros and cons
- Benchtop size saves floor space
- Inch and metric measurement system
- Threaded spindle nose
- Through-spindle bore for slender stock
- Motor, speeds and accessories not listed
- Heavy for a benchtop machine
- Swing falls short of the advertised size
Performance notes
Work size is set by the swing over the bed and the cross slide, and the bore limits what can pass through the headstock. Rigidity, and with it surface finish, depends on a bench that does not flex under the machine's weight.
Specifications
| Brand | Grizzly Industrial |
|---|---|
| Model | G0602 |
| Swing Over Bed | 9-1/2" |
| Distance Between Centers | 22" |
| Spindle Bore | 25mm |
| Spindle Thread | 1-3/4" x 8 TPI |
| Swing Over Cross Slide | 6-1/8" |
Frequently asked questions
What comes with the Grizzly G0602 lathe?
The listing does not name any included chucks, tooling or stand, so confirm the box contents with the seller before ordering.
Why is the Grizzly G0602 called a 10 inch lathe?
The title says 10 x 22, but the listed swing over bed is 9-1/2 inches and the swing over the cross slide is 6-1/8 inches, so size work to those figures.
Does the Grizzly G0602 need a stand?
It is a benchtop lathe and no stand is listed, so plan a bench or cabinet strong enough to carry it without flexing.
What motor does the G0602 have?
The listing only says it is corded electric; horsepower, voltage and speed range are not given.