Grizzly Industrial G0791 Lathe and Mill Combo 12x36 in
- 12 inch swing over bed, 11-5/16 inch over saddle
- 36 inches between centers
- 2 HP lathe motor, 220V single-phase, 8.5A
- 3/4 HP mill motor, 220V single-phase, 4.5A
- Lathe and mill in one machine, corded electric
Updated 20 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A compact way to get turning and milling into one footprint for a home or small shop. The listing is thin, so weight, speeds and included tooling must be confirmed before ordering, along with a suitable circuit.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B07KGR1NWZModel: G0791Category: Metal Lathes
Overview
A home machine shop or a garage corner gets metal turning and milling from one corded machine, with separate motors for the lathe and the mill head. Both motors run on single-phase power, so no three-phase supply is needed.
Combining a lathe and a mill saves the space and wiring of two machines while still giving each its own motor. Against that, the listing publishes only motor, swing and bed figures, so key details for planning the purchase are missing.
Who it's for
Hobby and small-shop metalworkers with a single-phase supply who want both operations without two separate machines. Shops needing complete specifications up front, or a building without a matching high-voltage circuit, should look elsewhere.
Pros and cons
- Separate motors for lathe and mill
- Single-phase power for both motors
- Long bed between centers
- Lathe and mill share one footprint
- Needs a 220V circuit
- Weight, speeds and tooling not listed
- Swing drops to 11-5/16 inch over saddle
Performance notes
Turning capacity is set by the swing over the bed and saddle, and part length by the distance between centers. Each operation draws on its own motor, with the stronger drive on the lathe and a smaller one on the mill. Rigidity and finish depend on machine mass and spindle design, which the listing does not state.
Specifications
| Brand | Grizzly Industrial |
|---|---|
| Model | G0791 |
| Swing Over Bed | 12" |
| Distance Between Centers | 36" |
| Lathe Motor | 2 HP, 220V, single-phase, 8.5A |
| Mill Motor | 3/4 HP, 220V, single-phase, 4.5A |
| Swing Over Saddle | 11-5/16" |
Frequently asked questions
Is the Grizzly G0791 two separate machines?
No. It is a combination lathe and mill in one machine, but each section has its own motor: 2 HP for the lathe and 3/4 HP for the mill.
Can the Grizzly G0791 run on three-phase power?
Both motors are listed as 220V single-phase. The listing makes no mention of three-phase operation.