Lutron Maestro MS-OPS6-DDV Occupancy Sensing Switch
- Two circuits from one sensor, single pole
- 6 A per circuit, fan loads supported
- Timeout 1, 5, 15 or 30 minutes per circuit
- Ambient light detection for daylight
- Requires a ground wire
- Wallplate not included, uses Claro plates
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
An in-wall occupancy sensor that runs two loads, such as a bathroom light and fan, with separate timeouts. It needs a ground wire and a separate wallplate, and it is not a dimmer.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B00GDAX0VCModel: Maestro MS-OPS6-DDVCategory: Light Switches
Overview
Not a regular toggle, the Lutron Maestro sensor switch turns two separate circuits on when someone enters and off after they leave. Each circuit gets its own timeout, and XCT sensing registers small movements like typing so lights stay on.
Bathrooms with a light and exhaust fan on separate wires get both automated from one switch, each with its own delay. A ground wire is required, and the matching wallplate is an extra purchase.
Who it's for
Homeowners who forget to switch off bathroom fans and lights will use the separate timeouts. Older homes without grounded boxes need rewiring or a different control.
Pros and cons
- Controls two loads independently
- Separate timeout per circuit
- Detects fine motion
- Daylight sensing option
- Requires a ground wire
- Wallplate sold separately
- No dimming function
Performance notes
Detection depends on the XCT sensor seeing motion in its field, so placement relative to the room matters. Each circuit times out on its own setting, letting a fan run longer than the light. Ambient light detection stops lights turning on when daylight is enough.
Specifications
| Brand | Lutron |
|---|---|
| Model | Maestro MS-OPS6-DDV |
| Dimensions & fit | |
| Item weight | 4.48 ounces |
| Item dimensions | 2.4 x 4 x 5.8 inches |
| Capacity & performance | |
| Wattage | 720 watts |
| Power & efficiency | |
| Operating Voltage | 120 volts |
| Construction & materials | |
| Color | Snow |
| Compatibility & installation | |
| Compatible Devices | Any bulb type incl. CFL and LED, fan loads |
| Connectivity Protocol | X-10 |
| Included components | |
| Unit Count | 1 Count |
| Other details | |
| Current Rating | 6 A per circuit |
| Circuit Type | Single pole, dual circuit |
| Connector Type | Screw terminals |
| Operation Mode | Automatic on/off with adjustable timeout (1, 5, 15 or 30 minutes) |
| Specification Met | UL |
| Sensor | XCT occupancy sensing, ambient light detection |
| Wiring requirement | Ground wire required |
| Contact Type | Normally Open |
| Control Method | Touch |
| International Protection Rating | IP54 |
| Item Type Name | Electrical Distribution Switcher |
| Switch Type | Push Button |
Frequently asked questions
What comes in the box with the Lutron MS-OPS6-DDV-SW?
The switch itself. The coordinating Claro wallplate is not included.
Can the Lutron dual circuit sensor control a bathroom fan?
Yes. It works in fan applications, with each circuit set to its own timeout.
Does the MS-OPS6-DDV-SW need a neutral or ground?
The listing states it requires a ground wire.
Will the lights turn off while I sit still?
XCT Sensing detects fine motion such as typing or reading to avoid turning lights off.