JET HVBS-712 Horizontal Vertical Metal Band Saw
- 7 inch round capacity, rectangles up to 12 inches wide
- 3/4 HP motor, 115/230 V single phase, 15 A circuit
- 4 speeds, 86 to 260 SFPM, worm gear in oil bath
- 3/4 x 93 inch bi-metal blade
- 45 degree cutting angle
- 9 x 12 inch worktable for vertical cutting
- 2.5 gal flood coolant, hydraulic downfeed built in
- 286 lb on four 8 inch rubber wheels
Updated 20 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A rigid cast-iron horizontal and vertical saw for a shop that cuts metal stock regularly, with coolant and hydraulic feed built in, though it is a heavy machine meant only for metal.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B01C9TVZBMModel: HVBS-712Category: Band Saws
Overview
A home or small machine shop that cuts steel and aluminum stock gets a metal-cutting band saw that works lying down or standing up. In the horizontal position a hydraulic downfeed lowers the bow through the work; tipped vertical, the worktable supports freehand cuts.
Repeat cuts on bar and tube stock are where it shines, thanks to the material stop for matching lengths and coolant that carries heat away from the blade. It is heavy, needs a dedicated circuit, and is built for metal only.
Who it's for
Metalworking shops that need square, repeatable cuts through round and flat stock get a machine that handles both angled and vertical work. Woodworkers and anyone short on floor space should pass on it.
Pros and cons
- Cast-iron bed and bow for rigidity
- Oil-bath worm gear drive
- Ball-bearing guides front and rear
- Built-in flood coolant system
- Metal only, not for woodworking
- Heavy machine for a small shop
- Needs a dedicated circuit to run
Performance notes
Cut straightness comes from the ground cast-iron bed, the flanged blade wheels and the bearing guides that hold the band square on both sides of the work. The gear drive running in oil sets blade speed, and the hydraulic downfeed controls feed so the blade is not forced. Slower speeds with coolant flowing suit tougher steels.
Specifications
| Brand | JET |
|---|---|
| Model | HVBS-712 |
| Dimensions & fit | |
| Blade Length | 93 inches |
| Item Weight | 286 pounds |
| Item Dimensions L X W X H | 48 × 17 × 40 inches |
| Power & efficiency | |
| Wattage | 2000 watts |
| Power Source | Corded Electric |
| Voltage | 115 volts |
| Construction & materials | |
| Blade Material | Bi-Metal |
| Handle Material | Plastic Or Metal Alloy |
| Color | Gray |
| Included components | |
| Unit Count | 1 |
| Included Components | Bandsaw, 5/8T Bi-Metal Blade, Table Plate, Work Stop, Wheels (x4), Hardware |
| Warranty & support | |
| Warranty Type | Limited |
| Manufacturer Warranty Description | 2 Year |
| Other details | |
| Surface Recommendation | Metal |
| Number Of Teeth | 24 |
| Current Rating | 15 A |
| Number Of Batteries | Unknown batteries required. |
| Number Of Items | 1 |
| Blade Shape | Rectangular |
| Other Special Features Of The Product | Auto Shutoff |
| Item Type Name | Horizontal Bandsaw |
| Specification Met | CSA/CUS |
| Item Highlight | Model HVBS-712 (414559) / 3/4 HP, 115/230V 1-Ph / 15A circuit / 2-Yr Warranty / Blade included |
| Cutting Angle | 45 degrees |
Frequently asked questions
Can the JET HVBS-712 cut wood?
No. JET describes it as a metal-cutting bandsaw engineered for steel, aluminum and other ferrous and non-ferrous metal stock.
What is included with the JET HVBS-712?
The saw ships with a 5/8 tooth bi-metal blade, a table plate, a work stop, wheels and hardware.