JET JWSS-22B Scroll Saw with Foot Switch 22 Inch
- 22 inch throat capacity
- 400 to 1,550 strokes per minute, variable speed
- 45 degree arm tilt right, table stays flat; left listed as 40 or 45
- 12-7/8 x 23 inch cast iron table
- 10 inch top arm lift, spring loaded, stays raised
- 2-in-1 upper blade change, clamps and tensions at once
- 120 volts corded, hands-free foot switch
- 68.2 lb machine weight
Updated 20 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A strong option for scrollers who change blades often and want bevels on a flat table; the listing gives two different figures for left arm tilt, so confirm that before relying on it.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B01G4VTYAUModel: JWSS-22BCategory: Scroll Saws
Overview
Not a tilting-table design, the JET JWSS-22B scroll saw tilts its arm instead, so the cast iron table stays flat while you cut bevels. Its upper blade mechanism clamps and tensions in one motion, the lower holder comes off without tools, and a foot switch runs the saw hands-free.
Fast blade changes are the headline: one upper mechanism clamps and tensions, and the arm lifts and stays up while you thread the next hole. A heavy cast iron table damps vibration. The listing disagrees with itself on left tilt range, and the warranty term shrinks under commercial use.
Who it's for
Fretwork and intarsia with frequent blade threading benefit most from the one-step upper clamp and the lifting arm. Occasional scrollers, or anyone who must carry the saw around, will not use what it offers.
Pros and cons
- One-step clamp and tension for blades
- Toolless removable lower blade holder
- Table stays flat during bevel cuts
- Cast iron table limits vibration
- Listing conflicts on left tilt range
- Heavy to move around the shop
- Shorter warranty under commercial use
- Stand not listed in the box
Performance notes
Cut accuracy comes down to blade tension and vibration. The upper mechanism sets tension in the same motion that clamps the blade, and the mass of the cast iron table damps shake as stroke speed climbs. Tilting the arm instead of the table leaves the workpiece level on bevels, so feed pressure stays even.
Specifications
| Brand | JET |
|---|---|
| Model | JWSS-22B |
| Dimensions & fit | |
| Blade Length | 5 inches |
| Item Weight | 68.2 pounds |
| Item Dimensions L X W X H | 33 × 15.5 × 17.5 inches |
| Capacity & performance | |
| Speed | 1550 rpm |
| Power & efficiency | |
| Wattage | 1800 watts |
| Power Source | Corded Electric |
| Voltage | 120 volts |
| Construction & materials | |
| Blade Material | High Speed Steel |
| Handle Material | Wood |
| Color | White |
| Included components | |
| Unit Count | 1 |
| Included Components | Scroll Saw, Leveling Feet (x4), Lower Blade Holders (x2), Foot Pedal, Dust Port, Blade Rack, Blades (36mm (t) x 1.1mm (W) x 130mm (L) x 11 TPI)(x5) |
| Warranty & support | |
| Warranty Type | Limited |
| Manufacturer Warranty Description | 5-Year Warranty (if used for commercial or industrial purposes then defaults to a 2-Year Warranty) |
| Other details | |
| Cutting Angle | 45 degrees |
| Surface Recommendation | Wood |
| Current Rating | 15 A |
| Number Of Items | 1 |
| Blade Shape | Rectangular |
| Other Special Features Of The Product | Foot Switch |
| Item Type Name | Scroll Saw |
Frequently asked questions
Does the JET JWSS-22B tilt the table for bevel cuts?
No. The arm tilts while the table stays flat. The bullets list 45 degrees both ways, while the description says 40 degrees left and 45 degrees right.
How are blades changed on the JET JWSS-22B?
The exclusive upper mechanism clamps and tensions the blade in one step. The lower blade holder is toolless and removable, the table has a blade slot, and a built-in wrench and blade storage slots are on the saw.
Does the JWSS-22B scroll saw have dust collection?
A dust port is included in the box. No dust blower is listed.