WEN LL2156 Parallel Arm Scroll Saw 21 Inch
- 21 inch parallel-arm design, wood up to 2 inches thick
- 550 to 1600 strokes per minute with a 3/4 inch stroke
- 25-5/8 x 16 inch steel table
- 45 degrees left, 30 degrees right table bevel
- 1.6 amp motor on 120 volts
- Two 5 inch pinless blades, 15 and 18 TPI
- 1-1/2 inch dust port, flexible air pump
- 53.8 lb steel build
Updated 20 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A roomy, low-vibration scroll saw for serious fretwork and inside cuts, helped by the lifting upper arm and tool-free blade changes. It is heavy and wide, so it needs a sturdy bench with room to spare.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B096G8SFC8Model: LL2156Category: Scroll Saws
Overview
A woodworker who does intricate inside cuts gets a parallel-arm WEN saw whose upper arm lifts and locks out of the way while the blade is rethreaded. Steel construction and the parallel drive damp noise and shake, and a broad steel table tilts in both directions.
Workpiece support is where it earns its bench space: the large table carries big patterns without overhang, and the dual bevel handles angled work either way. Blade choice is narrower, since the listing names only pinless and spiral types.
Who it's for
Makers producing fretwork and detailed signs gain table area and quick blade access. Crafters with a cramped corner or a flimsy bench should look at something smaller.
Pros and cons
- Parallel arm reduces vibration and noise
- Upper arm locks raised for inside cuts
- Dual side panels open without tools
- Table tilts left and right
- Heavy to move between benches
- Blade options limited to pinless and spiral
- Large footprint needs a deep bench
- Stand not mentioned in the listing
Performance notes
Two linked arms guide the blade so it travels in a steady line, and the steel frame limits vibration. Speed is set by a knob, so slower strokes with fine blades favor tight curves while faster strokes clear thicker boards. The air pump and dust port decide how clearly the cut line stays visible.
Specifications
| Brand | WEN |
|---|---|
| Model | LL2156 |
| Dimensions & fit | |
| Blade Length | 5 inches |
| Item Weight | 53.8 pounds |
| Item Dimensions L X W X H | 36.6 × 17.8 × 16.4 inches |
| Power & efficiency | |
| Wattage | 192 watts |
| Power Source | Corded Electric |
| Voltage | 120 volts |
| Construction & materials | |
| Blade Material | Alloy Steel |
| Handle Material | Metal |
| Color | Black Orange |
| Included components | |
| Unit Count | 1 |
| Included Components | Scroll Saw |
| Warranty & support | |
| Warranty Type | Limited |
| Other details | |
| Cutting Angle | 30 degrees |
| Surface Recommendation | Wood |
| Number Of Teeth | 18 |
| Current Rating | 1.6 A |
| Number Of Items | 1 |
| Blade Shape | Rectangular |
| Other Special Features Of The Product | Brushless |
| Item Type Name | 21-Inch 1.6-Amp Variable Speed Parallel Arm Scroll Saw With Extra-Large Dual-Bevel Steel Table |
| Eu Spare Part Availability Duration | 2 years |
Frequently asked questions
Does the WEN LL2156 need to be bolted to a bench?
The listing does not mention a stand or mounting hardware. Plan a firm bench large enough for the 25-5/8 inch table, with a 120 volt outlet nearby.
Can the WEN LL2156 use pinned blades?
The listing mentions only pinless or spiral blades for the bottom holder, so pinned blades are not confirmed.
How does the WEN LL2156 handle inside cuts?
The top arm can be raised and locked, so the blade can be threaded through a drilled hole in the workpiece.
Does the WEN LL2156 collect dust?
A flexible air pump blows dust off the work, and the 1-1/2 inch port helps clear the work area.