Creality Ender 3 V3 SE 3D Printer
- 8.66 x 8.66 x 9.84 inch printing size
- Up to 250 mm/s print speed, 2500 mm per square second acceleration
- CR Touch auto leveling, strain sensor auto Z offset
- Sprite direct extruder, PLA, PETG and TPU
- Dual Z-axis lead screws synced by a timing belt
- Two 8 mm steel linear shafts on the Y-axis
- 32-bit silent mainboard
- 3 assembly steps, about 20 minutes
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A capable entry printer for a beginner who wants auto leveling and a direct drive extruder without manual tuning. Some assembly is required, and nozzle and bed temperature limits are not stated.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B07D18L9K6Model: V3 SECategory: 3D Printers
Overview
A Sprite direct extruder pushes filament straight to the hot end on this Creality printer, feeding flexible TPU as well as PLA and PETG. CR Touch probing and a strain sensor set the bed level and Z offset on their own, and dual Z-axis lead screws reduce wobble as the gantry rises.
Automatic leveling and Z offset remove the fussiest setup step for newcomers. The listing omits nozzle and bed temperatures, which matters for anyone planning materials beyond the named filaments.
Who it's for
Newcomers and hobbyists printing PLA, PETG or flexible TPU at home get guided leveling and quick filament swaps. Users who need published temperature limits or a bigger build area should look at larger machines.
Pros and cons
- Auto leveling with CR Touch
- Automatic Z offset via strain sensor
- Direct extruder handles TPU
- One-tap filament load and unload
- Nozzle and bed temperatures not listed
- Requires assembly before first print
- Only PLA, PETG and TPU named
Performance notes
Print quality at speed depends on frame rigidity and motion control: the steel Y-axis shafts and belt-synced dual Z screws limit wobble, while the mainboard's stepper drivers control each axis precisely. First-layer results rest on the auto leveling and Z offset, which handle the setup a user would otherwise do by hand. Faster moves put more strain on the frame, so quality at top speed depends on those axes staying tight.
Specifications
| Brand | Comgrow |
|---|---|
| Model | V3 SE |
| Dimensions & fit | |
| Item weight | 15.43 pounds |
| Product dimensions | 17.8 × 16.9 × 20.5 inches |
| Capacity & performance | |
| Print volume | 8.66 x 8.66 x 9.84 inches |
| Filament loading | Auto load and unload |
| Print speed | Up to 250 mm/s |
| Warranty & support | |
| Supported filaments | PLA, PETG, TPU |
| Other details | |
| Extruder | Sprite direct extruder |
| Assembly | 3 steps, about 20 minutes |
| Acceleration | 2500 mm per square second |
| Build plate | PC spring steel, flexible |
| Leveling | CR Touch auto leveling, strain sensor auto Z offset |
| Mainboard | 32-bit silent |
| Y axis | Two 8 mm steel linear shafts |
| Z axis | Dual Z-axis lead screws, timing belt sync |
Frequently asked questions
How much bench space does the Ender 3 V3 SE need?
The printer measures 17.8 x 16.93 x 20.47 inches and weighs 15.43 pounds, so plan for a sturdy surface at least that size.
How do I remove prints from the Ender 3 V3 SE bed?
The PC spring steel build plate is flexible, so bending it slightly releases the printed model.
How are filament changes handled on the Ender 3 V3 SE?
It has auto filament loading and unloading: one tap loads the filament and one tap unloads it.