Snapmaker U1 Multi Color 3D Printer with Snapdryer
- 4 independent toolheads, SnapSwap tool changing
- 5 second tool change, down from around 2 minutes
- Up to 5X less filament waste and up to 5X faster multicolor
- Over 1,000,000 test swaps on the locking mechanism
- 3.5-inch touchscreen, plus remote app control
- Snapdryer dryer and storage box included with the printer
- 1 year warranty on the U1 printer
Updated 20 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A strong option for makers who print in several materials and want tool changes without purging, with a dryer bundled in. The listing leaves out build volume and print speed, so check those before buying for large parts.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0H5BMNNYGCategory: 3D Printers
Overview
Swapping whole toolheads instead of reloading one nozzle, the Snapmaker U1 holds each filament loaded and warm in its own head and switches between them during a job. The package also brings a Snapdryer filament dryer and a matching storage box for spool care.
Changing toolheads instead of filament is what sets the U1 apart: each material waits ready in its own head, so color and material switches waste little and finish fast. The bundled dryer and storage box add filament care from the first print. Missing from the listing are build volume, print speed and nozzle temperature, so sizing up large jobs needs a check with Snapmaker.
Who it's for
Hobbyists and professionals building prototypes with soluble supports or flexible inserts will use the separate heads fully. Someone printing single-color parts gains little from the toolhead system and should look at simpler machines.
Pros and cons
- Toolhead swaps replace unload, reload and purge
- Filaments stay preloaded and preheated
- Prints soluble supports alongside main material
- Mixes TPU with PLA or PETG
- Build volume and print speed not listed
- Warranty mentioned for the printer only
- Speed and waste gains are up-to figures
Performance notes
Multicolor speed and waste are governed by the SnapSwap toolhead change: the next filament is already loaded and heated, so the printer skips the unload, reload and purge cycle. Dimensional accuracy depends on automatic toolhead offset calibration lining the heads up with each other, while vibration compensation smooths fast moves. Print monitoring runs through an AI system and the remote app.
Specifications
| Brand | Snapmaker |
|---|---|
| Construction & materials | |
| Multi material | PETG+TPU, PLA+TPU, soluble supports |
| Warranty & support | |
| Warranty | 1 year |
| Other details | |
| Display | 3.5-inch touchscreen |
| Toolheads | 4 independent |
| Slicer | Snapmaker Orca (open Source) |
| Tool change time | 5 seconds |
Frequently asked questions
Can the Snapmaker U1 print TPU together with PLA or PETG?
Yes. The listing names PETG+TPU and PLA+TPU combinations, plus soluble supports, printed in a single job from 4 independent extruders.
What comes in the Snapmaker U1 bundle?
Snapmaker U1 3D Printer x 1, Snapdryer Filament Dryer x 1 and Snapdryer Filament Dryer Storage Box x 1. Filament is not in the package list.
Is the Snapmaker U1 a filament switcher feeding one nozzle?
No. It swaps between 4 individual toolheads that hold filament preloaded and preheated, so it does not load, unload and purge one nozzle at each change.
What slicer does the Snapmaker U1 use?
Snapmaker Orca, a custom open source slicing software, with a built-in model library.