Frizzlife SK99 Under Sink Water Filter System
- NSF/ANSI 42 and 53 certified by IAPMO
- 0.5 micron, 8 layer filter cartridges
- 2.5 gpm max flow, 20-80 psi
- Under 15 minute DIY install
- Filter, faucet and Teflon tape included
- Does not reduce TDS, minerals stay in
Last refreshed Sep 11, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A direct-connect under-sink filter with its own faucet that cuts chlorine, lead and particles while leaving minerals in. It does not lower TDS, so it is not a substitute for reverse osmosis.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B08NDYVZV5Model: SK99Category: Undersink & Countertop Water Filters
Overview
Not a reverse osmosis system, the Frizzlife filter is a direct under-sink carbon block unit that runs on line pressure. Water passes through layered cartridges to a dedicated faucet, and the filters twist in for replacement.
Certified reduction of lead, chlorine, taste and odor at a strong flow is the reason to fit it. Only the inner cores are replaced, which cuts plastic waste. It leaves dissolved solids alone, so hard or high-TDS water stays that way.
Who it's for
Homes on treated municipal water wanting better taste and lead reduction will see the benefit. Well water with high dissolved solids, or anyone chasing low TDS readings, needs reverse osmosis instead.
Pros and cons
- Certified to two NSF/ANSI standards
- Strong flow from line pressure
- Quick DIY installation
- Twist-in filter changes
- Does not reduce TDS
- Filter life not listed
- Ice maker kit sold separately
Performance notes
Contaminant reduction depends on contact time in the carbon block, so very high flow or old cartridges lower performance. Fine filtration catches particles that coarser filters miss. The added pressure regulator protects the housings from surges.
Specifications
| Brand | FRIZZLIFE |
|---|---|
| Model | SK99 |
| Dimensions & fit | |
| Item Dimensions L X W X H | 14.5 x 4.7 x 14.1 inches |
| Item Weight | 311.84 g |
| Capacity & performance | |
| Maximum Flow Rate | 2.5 gpm |
| Operating Pressure Range | 20-80 psi |
| Lowertemperature Range | 39 F |
| Upper Temperature Rating | 100 F |
| Capacity | 11 ounces |
| Power & efficiency | |
| Power Source | Water pressure |
| Construction & materials | |
| Material Type | NSF/ANSI Approved Components |
| Compatibility & installation | |
| Installation Type | Under sink |
| Compatible Water Purifier Models | Replacement filters M3001, M3002, M3003, set M3005; ice maker kit IMC-2 |
| Included components | |
| Included Components | Filter, faucet, Teflon tape |
| Unit Count | 1 Count |
| Other details | |
| Purification Method | Carbon block, 8 layer, 0.5 micron |
| External Testing Certification | NSF/ANSI 42 and 53, certified by IAPMO |
| Container Type | Cartridges |
Frequently asked questions
What comes in the box with the Frizzlife SK99?
The filter system, a faucet and Teflon tape. The IMC-2 ice maker kit for a fridge line is sold separately.
Does the Frizzlife SK99 reduce TDS?
No. It leaves minerals in and does not reduce TDS.
How long does Frizzlife SK99 installation take?
Under 15 minutes, with no plumber required.
Which replacement filters fit the Frizzlife SK99?
M3001, M3002 and M3003, or the M3005 filter set.