Thermalright AXP90 X36 Low Profile CPU Cooler
- 2700 rpm max fan speed
- 42.58 CFM airflow
- 22.4 dB rated noise
- 4-pin power connector, 12 V
- 3.6 W fan power draw
- Copper listed as heatsink material
- Air cooler, 408 g
Updated 25 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A low profile air cooler for compact desktop builds where case height is tight. Socket support appears only in the title and the listed height conflicts with it, so check clearance and mount fit before ordering.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B097DTVFQQModel: AXP90 X36Category: CPU Cooling Fans
Styles Available
Need a different one? Pick on Amazon →
Overview
A copper heatsink topped by a slim fan does the cooling on this Thermalright low profile cooler, pushing air down through the fins and over the CPU area. The fan plugs into a four pin header on the motherboard, so the board can control its speed.
Small form factor builders get a cooler made to clear low case lids while still moving a fair amount of air for its size. The fan spins fast at full load, which helps cooling but raises noise. Socket fit is not stated in the specs, so confirm your board before buying.
Who it's for
Compact desktop cases with low lids are where it belongs, since tall tower coolers cannot close inside them. Builders cooling a hot running processor in a roomy tower, or anyone who needs a confirmed socket list in the specs, should look at other options.
Pros and cons
- Compact low profile body for small cases
- Copper heatsink material
- Four-pin fan connection for board control
- Quiet rated noise level
- Socket support not stated in the specs
- Listed height conflicts with the title figure
Performance notes
Cooling depends on how much heat the copper base and fins pass into the air the fan pushes through them. A slim fan has to spin fast to move air, so noise rises when the board ramps it up under load. Case airflow matters too, because a low profile cooler reuses air from inside the case.
Specifications
| Brand | Thermalright |
|---|---|
| Model | AXP90 X36 |
| Dimensions & fit | |
| Item weight | 0.9 pounds |
| Item Dimensions L x W x H | 3.7 × 3.7 × 0.8 inches |
| Capacity & performance | |
| Air Flow Capacity | 43 CFM |
| Noise Level | 22 dB |
| Cooling Method | Air |
| Maximum Rotational Speed | 2700 rpm |
| Wattage | 4 watts |
| Power & efficiency | |
| Power Connector Type | 4-pin |
| Voltage | 12 volts |
| Construction & materials | |
| Material Type | Copper |
| Compatibility & installation | |
| Compatible Devices | Desktop |
Frequently asked questions
How tall is the Thermalright AXP90 X36?
The specs list dimensions of 3.74 x 3.7 x 0.83 inches, but the product title gives a different height. Measure your case clearance and confirm the height with Thermalright before buying.
How do I connect the AXP90 X36 fan?
The fan uses a 4-pin power connector at 12 V, so it plugs into a CPU fan header on the motherboard.
Is the AXP90 X36 a liquid cooler?
No. The cooling method is listed as air, using a copper heatsink and a fan.