ID-COOLING SE-224-XTS CPU Air Cooler
- 220 W cooling rating, air cooled
- Intel LGA1700, 115X, 1200 and AMD AM4, AM5 sockets
- 4 heatpipes, single 120mm fan
- 1500 rpm max, 70 CFM airflow
- 28.9 dB noise rating
- 4-pin fan connector, 12 V
Updated 25 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A straightforward air cooler for mainstream Intel and AMD desktop builds that want quiet cooling without liquid. Cooler height is not clearly stated, so measure case clearance first.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0BC132JDHModel: SE-224-XTSCategory: CPU Cooling Fans
Overview
Heatpipes carry heat from the processor into the heatsink, where a single fan blows air across it and into the case. ID-COOLING lists mounting hardware for current Intel and AMD desktop sockets, and the design leaves room for memory modules.
Socket coverage spans current and recent Intel and AMD desktop platforms, and the listed memory clearance means tall RAM is not a concern. With one fan on one heatsink, headroom under heavy sustained loads leans on case airflow. Warranty terms are missing from the listing.
Who it's for
Desktop builders replacing a stock cooler on an Intel or AMD board will find their socket on the list. Owners of compact cases with unknown clearance should measure first or look elsewhere.
Pros and cons
- Covers current Intel and AMD desktop sockets
- Full memory clearance listed
- Low rated fan noise
- Standard four-pin fan connector
- Cooler height not clearly listed
- Single fan only
- Thermal paste not named in the box
Performance notes
Cooling depends on how quickly the heatpipes move heat into the heatsink and how much air the fan pushes through it. Fan speed sets the balance between airflow and noise, so the motherboard fan curve controls the result. Case intake and exhaust matter too, since the cooler moves air inside the case rather than out of it.
Specifications
| Brand | ID-COOLING |
|---|---|
| Model | SE-224-XTS |
| Dimensions & fit | |
| Fan size | 120mm |
| Item weight | 1.43 pounds |
| Item Dimensions L x W x H | 5.9 × 3 × 4.7 inches |
| Capacity & performance | |
| Air Flow Capacity | 70 CFM |
| Noise Level | 29 dB |
| Cooling Method | Air |
| Maximum Rotational Speed | 1500 rpm |
| Wattage | 220 watts |
| Power & efficiency | |
| Power Connector Type | 4-pin |
| Voltage | 12 volts |
| Included components | |
| Included Components | Heatsink, cooling fan, mounting hardware |
| Other details | |
| Heatpipe count | 4 |
Frequently asked questions
How big is the ID-COOLING SE-224-XTS, and will it fit my case?
The listing gives 5.94 x 2.95 x 4.72 inches (L x W x H) without saying which axis is the cooler height, so compare it with your case's stated CPU cooler clearance before buying.
Will the ID-COOLING SE-224-XTS block my RAM slots?
The listing claims full memory clearance, so tall memory modules should not collide with the cooler.
Is the ID-COOLING SE-224-XTS a liquid cooler?
No. It is an air cooler: heatpipes, a heatsink and one fan powered from a 4-pin header at 12 volts.