ELEGRP G20PASR Auto Reset GFCI Replacement Plug
- Connector Type: Plug In
- Material Type: Auto Reset
- Number Of Packs: 1
- Color: Black
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B098JRB83YModel: G1215PA2 G20PASRCategory: Ground Fault Circuit Interrupter Outlets
Overview
A rewireable GFCI plug assembly, not a wall outlet, meant to replace the power cord plug on a 2-wire, non-grounded appliance such as a pressure washer or pool pump. It is rated 15 amp and self-tests every 5 seconds.
Because this is a plug end you wire onto an existing cord rather than an outlet you install in a box, the main compatibility question is the cable: it accepts 14, 16 or 18 AWG wire through two grommet sizes, and it is built for 2-wire non-grounded equipment, so it will not work as a grounded 3-prong replacement. The auto-monitor self-test runs every 5 seconds, more frequent than the UL standard of every 3 hours, and it resets automatically when power returns after a trip.
- Newer, smaller version of Elegrp's original G1215PA2 plug
- UL and CUL listed
- Two grommet sizes for different cable gauges
- LED indicator shows live power
Who it's for
Owners of pressure washers, pool pumps, generators or similar outdoor equipment whose original 2-wire plug has failed or needs GFCI protection added. Not for equipment that requires a grounded 3-prong plug.
Pros and cons
- Self-tests every 5 seconds versus the UL 3-hour standard
- IP65 water resistant for outdoor equipment
- Accepts 14, 16 or 18 AWG cable
- Automatic reset when power returns
- 2-wire non-grounded only, not a substitute for a grounded plug
- Requires wiring onto an existing cord, not plug-and-play
Performance notes
The self-test runs every 5 seconds rather than relying on a manual test button alone, and Elegrp states it passed over 6,000 factory test cycles with surge protection to 6 kilovolts. An IP65 rating and LED power indicator target outdoor and wet-location use, and first use requires pressing the reset button before power flows.
Specifications
| Brand | Elegrp |
|---|---|
| Model | G1215PA2 G20PASR |
| Dimensions & fit | |
| Item Dimensions D X W X H | 4.7 × 2 × 1.5 inches |
| Power & efficiency | |
| Amperage | 15 amps |
| Voltage | 125 volts |
| Construction & materials | |
| Material Type | Auto Reset |
| Color | Black |
| Included components | |
| Number Of Packs | 1 |
| Unit Count | 1 |
| Other details | |
| Connector Type | Plug In |
| Plug Type | Type A |
| Number Of Items | 1 |
| Number Of Poles | 2 |
| Number Of Wires | 2 |
| Part Number | 6957064536133 |
| Specification Met | Ul,cul |
Frequently asked questions
Does this GFCI plug work with grounded 3-prong cords?
No, it is a 2-wire non-grounded design and will not replace a grounded plug.
What wire gauges fit the plug?
It accepts 14 AWG, 16 AWG or 18 AWG cable through two included grommet sizes.
How often does it self-test?
It runs an automatic self-test every 5 seconds, more frequent than the UL standard of every 3 hours.