Zircon MultiScanner A200 Stud Finder
- Material Type: Plastic
- Power Source: Battery
- Item Weight: 0.82 pounds
- Color: Orange
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A more capable step up from a basic edge finder, worth it specifically for the center and direction readings and the dedicated metal scan mode, though it asks for the same careful calibration every time.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B09CVCZD1WModel: MultiScanner A200Category: Stud Finders
Overview
The Zircon MultiScanner A200 is a wall scanner that reads stud edges, centers and direction for both wood and metal studs, plus a separate metal only mode, guided by an LCD display, SpotLite pointer marking and a live wire warning.
Where a basic edge finder just tells you where a stud starts and stops, the A200 adds center and direction readings, useful when a fastener needs to land in the middle of a stud rather than near its edge. It shares the same calibration routine and 9V battery requirement as Zircon's simpler models.
- Wood and metal stud edge, center and direction detection
- Dedicated Metal Scan mode for locating metal behind walls
- DeepScan reaches up to 1-1/2 in for thicker surfaces
- WireWarning live wire alert plus LCD and SpotLite pointer
Who it's for
Suited to DIYers and pros mounting TVs, shelves, cabinets, handrails or fixtures who want a stud's center and direction, not just its edge. Overkill for someone who only needs a quick edge check on a single project.
Pros and cons
- Reads stud center and direction, not just edges
- Separate metal only scan mode
- WireWarning flags live wires while scanning
- SpotLite pointer marks findings on the wall
- Requires a 9V battery, sold separately
- Needs careful recalibration for each scan
- No visual image of what is behind the wall
Performance notes
Three scanning modes split the work: StudScan reads wood or metal edges and centers up to 3/4 inch deep, DeepScan extends that to 1-1/2 inches for thicker walls, and Metal Scan isolates metal objects on their own. As with Zircon's other scanners, results depend on holding the unit flat and still through the initial calibration beep before sliding it slowly across the surface.
Specifications
| Brand | Zircon |
|---|---|
| Model | MultiScanner A200 |
| Dimensions & fit | |
| Item Weight | 0.82 pounds |
| Item Dimensions L X W X H | 1.8 × 3.2 × 7.7 inches |
| Power & efficiency | |
| Power Source | Battery |
| Construction & materials | |
| Material Type | Plastic |
| Color | Orange |
| Included components | |
| Unit Count | 1 |
| Included Components | MultiScanner |
| Warranty & support | |
| Manufacturer Warranty Description | Limited Lifetime Warranty |
| Other details | |
| Display Type | Digital |
| Number Of Programs | 5 |
| Number Of Items | 1 |
| Item Type Name | Stud Finder |
| Item Highlight | Find wood and metal studs, detect metal objects and live AC wires before drilling with visual SpotLite® guidance |
| International Protection Rating | IP54 |
| Recommended Uses For Product | Metal Detection, Concrete Rebar Detection |
Closest rivals on specs
Franklin Sensors ProSensor M210 Stud Finder- Item Weight 0.82 vs 0.71 pounds (+15%)
PREXISO 2-in-1 Stud Finder with Laser Level- Item Weight 0.82 vs 0.6 pounds (+37%)
Frequently asked questions
What is different about the Zircon MultiScanner A200 compared to a basic stud finder?
It reads a stud's center and direction in addition to its edges, and adds a dedicated Metal Scan mode for locating metal objects behind the wall on their own.
How many scanning modes does the Zircon A200 have?
Three: StudScan for standard depth up to 3/4 inch, DeepScan for up to 1-1/2 inches, and Metal Scan for metal only detection.
Does the Zircon MultiScanner A200 include a battery?
No, it takes a single 9V alkaline battery that must be purchased separately.