Creality TPU 95A Flexible Filament 1 kg
- 95A shore hardness, black
- 3 times stretch before breaking
- 1.75mm, +/- 0.05 mm per bullets
- 1 kg spool (2.2lbs)
- 24 hour drying before vacuum sealing
- Direct drive extruder recommended
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A black flexible TPU for seals, bumpers and wearables that needs a direct drive extruder for the most reliable prints. The tolerance in the title is tighter than in the bullets.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0C2Z1LJGMModel: TPU 95ACategory: 3D Printing Filament
Colors Available
Need a different one? Pick on Amazon →
Overview
Printing gaskets, phone cases or drone bumpers calls for flex, and this black Creality TPU stretches and springs back. It arrives dried and vacuum sealed so it prints without bubbles, and Creality recommends a direct drive extruder.
Rubbery, impact absorbing parts are what this filament is for. Printers with long feed tubes struggle with soft filament, so check your extruder before ordering.
Who it's for
Makers printing watch bands, insoles and protective covers will get good results on direct drive machines. New users on basic Bowden printers should start with PLA.
Pros and cons
- Very flexible and resilient
- Good bed adhesion
- Low warp and odor
- Dried and vacuum sealed
- Direct drive strongly advised
- Tolerance stated two ways
- Print temperatures not listed
Performance notes
Flex comes from the TPU shore hardness, which balances softness with enough stiffness to feed. Soft filament can buckle in long feed paths, so a short direct drive path improves success. Drying before packaging avoids moisture bubbles.
Specifications
| Brand | Creality |
|---|---|
| Model | TPU 95A |
| Dimensions & fit | |
| Item Diameter | 1.75mm, +/- 0.05 mm |
| Filament weight | 1 kg (2.2lbs) |
| Construction & materials | |
| Material Type | TPU |
| Color | Black |
| Included components | |
| Packaging | Dried 24 hours, vacuum sealed with desiccants |
| Other details | |
| Shore hardness | 95A |
| Elongation | 3 times original length |
| Recommended extruder | Direct drive |
Frequently asked questions
Will Creality TPU 95A work on my Ender with a Bowden tube?
Creality recommends a direct drive extruder, which greatly improves the success rate. Bowden setups may struggle with soft filament.
What can I print with Creality TPU 95A?
Seals, plugs, gaskets, key ring cases, insoles, watch bands, phone cases and drone parts, per Creality.
How much Creality TPU is on the spool?
1 kg (2.2lbs).