Creality TPU 95A Flexible Filament 2 kg
- 95A shore hardness
- Stretches 3 times its original length
- 1.75mm, +/-0.05 mm at 99% probability
- 1 kg spool (2.2lbs)
- Dried 24 hours, vacuum sealed
- Direct drive extruder recommended
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A flexible TPU for gaskets, phone cases and wearable parts, dried and sealed for clean printing. It works most reliably on a direct drive extruder.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0H8XGD3JVModel: TPU 95ACategory: 3D Printing Filament
Colors Available
Need a different one? Pick on Amazon →
Overview
A thermoplastic polyurethane base gives Creality TPU its rubbery stretch, letting printed parts flex and recover. Dried and vacuum sealed before packing, it feeds without bubbles on most desktop printers, preferably with a direct drive extruder.
Elastic, shock absorbing parts are what TPU is for, from seals to watch bands. Bowden setups struggle with soft filament, and the title and bullets give different spool weights.
Who it's for
Hobbyists printing phone cases, drone bumpers and gaskets will use its flex. Printers with long Bowden tubes may see jams and stringing.
Pros and cons
- Very stretchy and resilient
- Good bed adhesion
- Low warp and odor
- Dried and vacuum sealed
- Needs direct drive for reliable results
- Spool weight listed two ways
- Print temperatures not listed
Performance notes
Flexibility comes from the TPU's shore hardness, which sets how soft and stretchy printed parts feel. Soft filament can buckle inside long feed paths, which is why a direct drive extruder improves success. Moisture causes bubbles, so dry storage matters.
Specifications
| Brand | Creality |
|---|---|
| Model | TPU 95A |
| Dimensions & fit | |
| Item Diameter | 1.75mm, +/-0.05 mm |
| Filament weight | 1 kg (2.2lbs) |
| Construction & materials | |
| Material Type | TPU (thermoplastic polyurethane) |
| Included components | |
| Packaging | Dried 24 hours, vacuum sealed with desiccants |
| Other details | |
| Shore hardness | 95A |
| Elongation | Stretches 3 times original length |
| Recommended extruder | Direct drive |
Frequently asked questions
What spool size is this Creality TPU?
The bullets say a 1 kg spool (2.2lbs), while the title also mentions 2 kg. Confirm the weight with the seller.
Can I print Creality TPU on a Bowden printer?
Creality recommends a direct drive extruder, which greatly improves the success rate.
How flexible is Creality TPU 95A?
It has a shore hardness of 95A and can stretch 3 times its original length.