FLASHFORGE Adventurer 5M 3D Printer
- 220x220x220mm build volume
- 600mm/s max speed, 20000 mm/s² acceleration
- 280°C nozzle, quick detachable direct extruder
- 32mm³/s nozzle flow, 50w heating power
- One-click full auto leveling
- 0.4mm nozzle for PLA, PETG, TPU; 0.6mm for PLA-CF, PETG-CF
- 23.8 pounds, 14.29 x 15.83 x 17.64 inches
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A fast, self-leveling desktop printer that gets common filaments running with little setup. The open frame needs a ventilated space, and carbon fiber blends call for swapping to the larger nozzle.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0CHJGFVSLCategory: 3D Printers
Overview
Flashforge built the Adventurer 5M around CoreXY motion and a quick detachable direct extruder. One-click auto leveling calibrates the flexible PEI steel plate before printing, and vibration compensation cuts ghosting on fast moves.
Setup is short and the printer handles leveling, filament run-outs and power cuts on its own, which suits someone who wants prints more than tinkering. The open frame is the limit, since Flashforge recommends a well-ventilated space, and the listing says nothing about a camera or network features.
Who it's for
Home makers printing PLA, PETG and TPU parts at speed will get the most from it. Buyers who need a closed chamber should look at an enclosed machine.
Pros and cons
- Fast CoreXY motion with vibration compensation
- One-click auto bed leveling
- Filament run-out sensor
- Resumes after a power cut
- Open frame needs a ventilated room
- Carbon fiber filaments need the larger nozzle
- Camera and connectivity not listed
Performance notes
Speed comes from CoreXY motion and high acceleration, while vibration compensation removes the ghosting that fast direction changes cause. The hotend flow rate decides how fast plastic can actually be laid down, so thicker layers do not starve the nozzle. First-layer quality rests on the automatic leveling and the PEI coated plate.
Specifications
| Brand | Flashforge |
|---|---|
| Dimensions & fit | |
| Item weight | 23.8 pounds |
| Item dimensions l x W x h | 14.3 × 15.8 × 17.6 inches |
| Nozzle sizes | 0.4mm (PLA, PETG, TPU), 0.6mm (PLA-CF, PETG-CF) |
| Capacity & performance | |
| Build volume | 220 x 220 x 220 mm |
| Max print speed | 600mm/s |
| Heating power | 50 watts |
| Max nozzle temperature | 536 °F |
| Nozzle flow rate | 1.3 inches |
| Construction & materials | |
| Frame | Open, for well-ventilated spaces |
| Warranty & support | |
| Supported filaments | PLA, PETG, TPU, PLA-CF, PETG-CF |
| Other details | |
| Bed leveling | One-click full auto |
| Extruder | Direct, quick detachable nozzle |
| Motion system | CoreXY |
| Max acceleration | 20000 mm/s² |
| Heat up time | 200℃ in 35 seconds |
| Safety features | Filament run-out sensor, power loss recovery |
Frequently asked questions
How do I remove prints from the Flashforge Adventurer 5M build plate?
The PEI steel plate is removable and flexible, so lift it off the printer and flex it to free the part. Both sides are PEI coated, so the plate can be flipped.
What happens if filament runs out during a print on the Adventurer 5M?
The run-out sensor catches the empty spool. Load new filament and resume, and power loss recovery lets a print continue after a power cut.
Is the Flashforge Adventurer 5M an enclosed printer?
No. It is an open printer, and Flashforge says to use it in an open, well-ventilated space.
How long does the Adventurer 5M take to set up?
Flashforge quotes 10 minutes from unboxing to starting a print, with bed leveling handled automatically.
How quickly does the Adventurer 5M nozzle heat up?
The 50w heater brings the nozzle to 200℃ in 35 seconds.