SDSACZMU Radar Detector Mount
- Radar Detector
A sound suction-cup alternative for the Uniden models it lists, but check the compatibility list before buying since R7 and R8 are explicitly excluded.
As an Amazon Associate, ProductDome may earn a commission from qualifying purchases made through links on this page.
How it ranks among the 17 radar detectors we track
4.3★ across 401 Amazon ratings, Bayesian-smoothed toward the category average.
401 Amazon ratings, weighted on a log scale so huge counts don't drown everything.
500+ bought on Amazon last month.
Brand identity, imagery, description and spec coverage.
The ProductDome score is separate from the Amazon rating shown above: it combines the Bayesian-smoothed Amazon rating with evidence volume, tracked demand, and data quality across the 17 radar detectors we track - how the scorecard works · full radar detectors data report. Confidence: limited - incomplete product information.Updated 8 days ago. Data-computed, not a hands-on test. Compiled by the ProductDome Research Team.
Overview
This is a mounting bracket, not a radar detector itself: an aluminum alloy rod that clamps to the rearview mirror and holds a compatible Uniden detector on a ball adapter, tightened in place with a hex wrench instead of a suction cup.
The listing is specific about fit: it covers Uniden R1 through R6 and the LRD and DFR series, but explicitly does not fit the Uniden R7 or R8. A spare adapter is included in case the stock one is the wrong length.
- Aluminum alloy rearview mirror rod bracket
- 0.63 inch ball adapter, 1/4 and 3/8 interchangeable screw
- Compatible with Uniden R1 to R6, LRD and DFR series
- No suction cup, hex-wrench locked position
Who it's for
Owners of a compatible Uniden radar detector who want a fixed mirror mount instead of a suction cup. Not for Uniden R7 or R8 owners, or detectors from other brands.
Strengths and trade-offs
Drawn from this product's published specifications.
- No suction cup to fail or fall off over time
- Aluminum alloy construction for a rigid mount
- Extra connection adapter included for a different device
- Not compatible with the Uniden R7 or R8
- Only fits Uniden brand detectors with a matching ball diameter
- Requires a hex wrench for the initial adjustment
Performance notes
The 0.63 inch ball adapter connects to any rotating ball of that diameter, and the handle carries a 1/4 to 3/8 interchangeable screw so the same bracket can take a different accessory if the detector changes later.
Specifications
| Brand | Sdsaczmu |
|---|
Other Sdsaczmu radar detectors
How it compares
This product against the closest alternatives we track in radar detectors.
| Product | Amazon rating | Ratings | ProductDome score |
|---|---|---|---|
| SDSACZMU Radar Detector MountThis product | 4.3 / 5 | 401 | 2.7 / 5 |
| Uniden R3 EXTREME LONG RANGE Laser/Radar DetectorUniden | 4.6 / 5 | 7,900 | 4.6 / 5 |
| Xislet 3PCS 16.5" Radar Detector Hardwire Power Cord Mirror Wire Plug TapXislet | 4.7 / 5 | 1,600 | 4.3 / 5 |
| Escort Redline 360c Plug and Play Radar DetectorEscort | 4.6 / 5 | 384 | 4.3 / 5 |
| Cobra RAD 480i Laser Radar DetectorCobra | 4.2 / 5 | 10,800 | 4.3 / 5 |
Similar radar detectors from other brands
Questions about the Sdsaczmu radar detectors
Common buyer questions answered straight from the product spec data - no fluff, no "it depends".
Is the SDSACZMU mount compatible with the Uniden R7 or R8?
No, the listing states it is not compatible with those two models.
Does this mount use a suction cup?
No, it clamps to the rearview mirror rod and locks with a hex wrench instead of a suction cup.
What Uniden models does this bracket fit?
Uniden R1, R2, R3, R4, R6, plus the LRD and DFR series detectors, per the listing's compatibility list.