Creality K2 Pro Combo Multicolor 3D Printer
- 300x300x300mm build volume
- Up to 600 mm/s, 20,000 mm/s2 acceleration
- Up to 16-color printing with CFS
- 60 C active chamber heating for ASA and PPA
- 40mm3/s flow, hardened steel gears
- Dual AI cameras, WiFi and LAN
- 61.6 pounds, 17 x 20 x 18 inches
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A large, heated-chamber multicolor printer for makers who print big parts and engineering materials. It is heavy and needs a sturdy bench, and only a single spool of starter filament is in the box.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0FDGBWZ58Model: K2 Pro ComboCategory: 3D Printers
Overview
Not a desktop starter and not an open-frame kit, this Creality combo is an enclosed printer with active chamber heating and the CFS multicolor system. Step-servo motors on linear rails drive the head, and two AI cameras watch the print and tune flow.
A big build volume plus a heated chamber makes it fit for large prototypes in ASA or carbon-filled filaments. The machine is heavy, and the multicolor setup adds waste filament on color changes.
Who it's for
Product designers and serious hobbyists who need size, heat and color in one enclosed unit are the target. Casual users printing small figures will not use most of its capacity.
Pros and cons
- Large cube build volume
- Heated chamber reduces corner warping
- Handles carbon fiber filaments
- Camera-based failure detection
- Heavy, needs a sturdy surface
- Only one starter spool included
- Max nozzle temperature not listed
Performance notes
Corner warping on ASA and similar plastics comes from cooling stress, which a heated chamber reduces by holding air temperature around the part. The nozzle camera tunes flow and pressure advance as it prints, which governs dimensional accuracy. Servo motors on rails let it hold high acceleration without skipping.
Specifications
| Brand | Creality |
|---|---|
| Model | K2 Pro Combo |
| Dimensions & fit | |
| Item weight | 61.6 pounds |
| Product dimensions | 17 x 20 x 18 inches |
| Capacity & performance | |
| Build volume | 300x300x300mm |
| Max print speed | 600 mm/s |
| Nozzle flow rate | 40mm3/s |
| Construction & materials | |
| Multi color | Up to 16 colors with CFS |
| Compatibility & installation | |
| Connectivity | WiFi, LAN, OTA updates |
| Warranty & support | |
| Supported filaments | PLA, ABS, ASA, PPA-CF, PET-CF |
| Other details | |
| Extruder | Direct drive, hardened steel gears, auto cutting |
| Motion system | FOC step-servo motors, linear rails |
| Max acceleration | 20,000 mm/s2 |
| Camera | Chamber and nozzle AI cameras |
| Enclosure | Active chamber heating up to 60 C |
| Slicer | Creality Print, Cura |
Frequently asked questions
What comes in the box with the Creality K2 Pro Combo?
One K2 Pro 3D printer, one Creality CFS, one 500g Hyper RFID filament and one K2 Pro hardened steel nozzle.
Is the Creality K2 Pro an open-frame printer?
No. It holds chamber temperature up to 60 C with active heating, which requires an enclosed chamber.
Which filaments does the Creality K2 Pro support?
Creality lists PLA, ABS, ASA, PPA-CF and PET-CF among others.
What slicer works with the Creality K2 Pro?
It runs Creality OS and is compatible with Creality Print, Cura and more.