SUNLU PLA+ 2.0 High Speed Filament 1 kg
- 1.75mm, plus or minus 0.02mm tolerance
- 50-600mm/s print speed range
- 12x toughness vs standard PLA, maker claim
- Removable spool core for Bambu refills
- Vacuum sealed with desiccant
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A fast-flowing PLA+ for owners of high-speed printers who want tougher parts and Bambu-friendly spools. Nozzle temperature is not listed, so start from your printer's PLA profile.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0FDGGVHVXModel: PLA+ 2.0Category: 3D Printing Filament
Colors Available
Need a different one? Pick on Amazon →
Overview
Running a high-speed printer flat out is what this Sunlu PLA+ is tuned for, with a melt flow designed for fast extrusion and a tougher blend than standard PLA. The spool core snaps out so the coil can fit a Bambu refill spool.
Speed and toughness in one easy PLA-type filament make it a good everyday material on fast machines. Recommended temperatures are absent, so expect some tuning.
Who it's for
Owners of fast printers who print daily parts and prototypes get a tougher, quicker PLA. Anyone printing parts for hot cars or outdoor heat should look at PETG or ASA.
Pros and cons
- Tuned for very high print speeds
- Tougher than standard PLA
- Tight diameter tolerance
- Removable core suits Bambu refills
- Nozzle temperature not listed
- Spool weight not in bullets
- PLA softens at lower heat
Performance notes
High-speed printing depends on how fast plastic melts in the hotend, which the optimized melt flow addresses. A tight diameter tolerance holds extrusion width steady for smooth walls. Dry storage with desiccant limits moisture, which causes stringing.
Specifications
| Brand | Sunlu |
|---|---|
| Model | PLA+ 2.0 |
| Material Type | PLA+ 2.0 |
| Item Diameter | 1.75mm, plus or minus 0.02mm |
| Additional Features | Print speed 50-600mm/s, removable spool core, vacuum sealed with desiccant |
| Item Highlight | 12x toughness vs standard PLA |
Frequently asked questions
Does Sunlu PLA+ 2.0 fit Bambu printers?
Sunlu says the spool has a removable inner core that works with Bambu filament refills, and the filament is optimized for printers like the Bambu Lab X1 series.
How fast can I print Sunlu PLA+ 2.0?
Sunlu lists a range of 50-600mm/s.
Is Sunlu PLA+ 2.0 the same as regular PLA?
No. Sunlu describes it as an upgraded PLA+ with 12x the toughness of standard PLA.