Polymaker PETG Filament 1.75mm 1 kg
- PETG, high strength and toughness
- Up to 500mm/s print speed
- Reduced stringing and warping
- Diameter and temps not in bullets
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A tough, fast-printing PETG for functional parts with cleaner surfaces than typical PETG. The bullets list no diameter, temperatures or spool weight, so check the label before buying.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0FG3HMCVYCategory: 3D Printing Filament
Colors Available
Need a different one? Pick on Amazon →
Overview
Polymaker formulates this PETG for high-flow printing, aiming for strong layer bonding, low warping and less stringing. It suits parts that face daily stress, such as brackets, mounts and enclosures.
Clean, strong parts at high speeds are the reason to choose it. The bullet list leaves out every hard figure except speed, so settings come from your slicer profile.
Who it's for
Makers printing brackets, enclosures and mechanical parts get tough PETG that strings less. Newcomers learning on their first printer may find PLA more forgiving.
Pros and cons
- Strong layer adhesion
- Less stringing and oozing
- Supports high speeds
- Tough under mechanical stress
- No diameter listed in bullets
- No print temperatures given
- Results depend on correct settings
Performance notes
Layer strength depends on bonding between hot plastic and the layer below, which PETG does well. Stringing comes from ooze during travel moves, and the formulation is designed to cut it when settings are right. High-flow melt behavior lets it extrude evenly at speed.
Specifications
| Brand | Polymaker |
|---|---|
| Material Type | PETG |
| Color | Black |
| Additional Features | High speed up to 500mm/s, reduced stringing, low warping |
Frequently asked questions
How fast can Polymaker PETG print?
Polymaker says it supports speeds up to 500mm/s.
Is Polymaker PETG good for mechanical parts?
Polymaker describes it as strong and tough, made for parts that handle everyday stress and mechanical use.