Lutron Claro Light Switch with Wireless Motion Sensor
- 5A switch with Claro wallplate
- Wireless motion sensor, 180 degree field of view
- 60 ft range to multiple switches
- 10 year sensor battery life
- Occupancy or vacancy mode
- Single-pole / 3-way, works with any bulbs
- Caseta compatible, app optional
Updated 22 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A plug-and-play motion lighting kit with a wireless sensor you can place anywhere in the room. It is on/off only, and the switch handles a modest load.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0FH5JFCRPCategory: Light Switches
Overview
A closet, pantry or laundry room is where this Lutron kit earns its keep: the Claro switch replaces the wall switch, and a wireless motion sensor mounted anywhere in the room turns lights on and off as you come and go.
Homeowners get hands-free lighting in rooms where the switch is awkward or outside the door, with a sensor that needs no wiring. The switch carries a modest current limit, so check the fixtures on the circuit.
Who it's for
Rooms entered with full hands, or closets with the switch outside, suit the remote-mounted sensor. Anyone needing dimming should note this is an on/off switch.
Pros and cons
- Sensor mounts anywhere, no wiring
- Occupancy and vacancy modes
- Works with any bulb type
- One sensor runs several switches
- On/off only, no dimming
- Modest switch current limit
- Neutral wire requirement not listed
Performance notes
Lights respond to the wireless sensor, which covers a wide field and signals the switch over the Clear Connect link. Vacancy mode turns lights off automatically but leaves turning them on to you.
Specifications
| Brand | Lutron |
|---|---|
| Capacity & performance | |
| Sensor range | Up to 60 ft to switches |
| Power & efficiency | |
| Battery life | 10 year sensor battery |
| Construction & materials | |
| Color | White |
| Compatibility & installation | |
| Connectivity Protocol | Clear Connect |
| Mounting Type | Wall mount switch; sensor freestanding, wall or corner |
| Compatible Devices | Any bulb type, Lutron Caseta smart system |
| Included components | |
| Included Components | 5-Amp switch, Claro wallplate, wireless motion sensor, mounting hardware |
| Other details | |
| Current Rating | 5 A |
| Circuit Type | Single-pole / 3-way |
| Control Type | Automatic, motion sensor |
| Connector Type | Screw terminals |
| Operation Mode | Occupancy (auto on/off) or vacancy (manual on, auto off) |
| Specification Met | ETL |
| Field of view | 180 degrees |
Frequently asked questions
Is the Lutron Claro motion switch a dimmer?
No. The included Claro switch is an on/off switch.
Does the Lutron motion sensor need wiring?
No. The sensor is wireless and can stand on a flat surface or mount to a wall or corner.
Do I need the Lutron app?
No. It works standalone; the app is only needed if you add it to a Caseta smart system.
How long does the Lutron kit take to install?
Lutron says as little as 15 minutes.