Galaxy XD2010 Foam Filled Skid Steer Tire and Rim 5.70-12
- Foam filled (no flat) tire on 5 lug wheel
- 5 on 4.5" bolt pattern, 3" center hole
- Bobcat 310, 371, 440, 443, 450, 453, 463, S70 and others
- 1350 lb load capacity per tire
- 4 ply bias, R-4 tread, 16/32 tread depth
- 21" diameter, about 60 lb each
- 1.06" offset, 3.19" backspacing
Updated 5 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A puncture proof, ready to mount wheel and tire for small Bobcat skid steers working around nails, rebar and debris. The listing conflicts on whether you get one tire or four.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0FHBTFDSNModel: XD2010Category: Tire & Wheel Assemblies
Overview
A foam core in place of air is the key part of this Galaxy skid steer tire, so it cannot go flat on a nail or rebar. It arrives mounted on a five lug wheel drilled for small Bobcat machines, ready to bolt straight on.
Flat proof tires save downtime on demolition and scrap jobs where punctures are routine. Foam fill adds weight and gives a stiffer ride, and the listing title says one tire while a bullet says a set, so confirm the count before ordering.
Who it's for
Contractors running older compact Bobcat loaders on rough sites will spend less time fixing flats. Owners who mostly work clean turf may prefer lighter air filled tires.
Pros and cons
- Cannot go flat
- Arrives mounted on the wheel
- Heavy sidewall resists damage
- Long wearing industrial tread
- Heavy to lift and mount
- Stiffer ride than air filled
- Listing conflicts on tire count
- Fit depends on lug size
Performance notes
Foam fill removes air pressure from the equation, so punctures do not stop work, but the tire rides firmer and adds weight to the machine. The neutral contour shape limits carcass stress. Fit depends on matching the lug pattern, center hole, offset and lug hole size to your hub.
Specifications
| Brand | Tires |
|---|---|
| Model | XD2010 |
| Dimensions & fit | |
| Tire diameter | 21 inches |
| Rim width | 4 inches |
| Load capacity | 1350 pounds |
| Tread depth | 16/32 |
| Size | 5.70-12 |
| Rim size | 12 inches |
| Section width | 5.7 inches |
| Item weight | 60 pounds |
| Capacity & performance | |
| Load index | 98 |
| Speed rating | A2 |
| Construction & materials | |
| Construction type | Bias |
| Included components | |
| Unit count | 1 Count |
| Warranty & support | |
| Manufacturer warranty description | Limited Manufacturer |
| Other details | |
| Tread type | Directional |
| Ply | 4-Ply |
| Bolt pattern | 5 on 4.5", 3" center hole |
| Automotive fit type | Vehicle Specific Fit |
| Fitment | Bobcat 310, 371, 440, 443, 450, 453, 463, S70; CFG Industrial KRW232 and others |
| Lug hole | 1/2" standard, drilled to 9/16" or 5/8" per order |
| Rim offset | 1.06" from valve stem side, 3.19" backspacing |
| Fill | Foam filled (no flat) |
Frequently asked questions
What size is the Galaxy XD2010 5.70-12 tire?
It is 21" tall and 5.7" wide on a 12 inch rim with a 4 inch rim width. The seller asks you to confirm the wheel specs against your machine.
Is it one tire or a set of four?
The title and specs say a single tire on a wheel (1 Count), while one bullet says a set of 4. Confirm with the seller before ordering.
Will the lug holes fit my Bobcat?
The pattern is 5 on 4.5". Small Bobcats use 1/2", 9/16" or 5/8" lugs; the rims ship with 1/2" holes and the seller drills them out per order.
Can it go flat?
No. It is foam filled, which the seller describes as no flat.