Galaxy XD2010 Skid Steer Tire and Rim 12-16.5
- 12-16.5, 12 ply bias tire on wheel
- 8 on 8 in bolt pattern, 6 in center hole
- 3527 lb load capacity, 60 psi max
- 4.13 in offset, 6.5 in backspacing
- Premounted single, R-4 tread
- 29/32 in tread depth
Updated 5 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A premounted heavy duty skid steer tire and wheel that bolts onto most eight lug machines and suits hard surfaces. Offsets vary by maker, so confirm yours before ordering.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0FT8VRKYJModel: XD2010Category: Tire & Wheel Assemblies
Sets Available
Need a different one? Pick on Amazon →
Overview
A neutral contour casing that holds nearly the same shape inflated or not is at the heart of the Galaxy skid steer tire. It comes mounted on an eight lug steel wheel, ready to bolt on, with an industrial lug tread and a continuous center for long wear on hard ground.
Galaxy saves you a trip to the tire shop by shipping this tire premounted, and the wheel pattern matches most skid steer brands. Offsets differ between manufacturers, so the wheel may sit slightly differently on some machines.
Who it's for
Machines working on concrete, gravel and job sites get long wear from the continuous center tread. Operators in soft mud or sand need a wider flotation tire instead.
Pros and cons
- Premounted and ready to install
- Fits most eight lug skid steers
- Heavy sidewall resists damage
- Abrasion resistant tread
- Offsets vary by brand
- Pneumatic, can puncture
- Heavy to handle alone
Performance notes
A neutral contour means the casing flexes little when inflated, which cuts internal stress and heat. The continuous center rib wears slowly on hard surfaces, while the side lugs give moderate grip off pavement.
Specifications
| Brand | Tires |
|---|---|
| Model | XD2010 |
| Dimensions & fit | |
| Tire diameter | 32.3 inches |
| Rim width | 9.75 inches |
| Load capacity | 3527 pounds |
| Tread depth | 29/32 inch |
| Size | 12-16.5 |
| Rim size | 16.5 inches |
| Section width | 12 inches |
| Item weight | 100 pounds |
| Capacity & performance | |
| Load index | 144 |
| Construction & materials | |
| Construction type | Bias, tubeless |
| Included components | |
| Included components | 1 tire mounted on wheel |
| Other details | |
| Ply | 12-Ply |
| Maximum pressure | 60 psi |
| Bolt pattern | 8 on 8 inch, 6 inch center hole |
| Wheel offset | 4.13 inch from valve stem side, 6.5 inch backspacing |
Frequently asked questions
How tall is the Galaxy 12-16.5 skid steer tire on wheel?
The tire diameter is 32.3 inches with a 12 inch overall width including the rim guard.
Will the Galaxy 12-16.5 tire and wheel fit my Bobcat?
Bobcat is named among brands that mostly use an 8-lug rim, and this wheel has an 8 on 8 inch pattern with a 6 inch center hole. Offsets vary between manufacturers, so check yours.
Is the Galaxy 12-16.5 tire foam filled?
No. It is an air-filled pneumatic tire. The seller says foam filling is available on request.
Is this a single tire or a set?
This listing is one tire mounted on one wheel.