PiSugar S Battery Pack for Raspberry Pi Zero 2 W 1200mAh
- 1200mAh lithium battery with automatic switchover
- Up to 10 hours on Pi Zero W, 6+ hours on Pi Zero 2W
- 5V/2A USB Type-C input with pass-through
- About 2 hours to fully charge
- Auto boot when power returns
- 60x30mm board, 4 mounting screws included
- 2 year warranty
Updated 20 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A simple backup battery for a Pi Zero that boots itself when power returns, but it lacks a clock for scheduled starts and the custom button clashes with bus sensors.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0GLYFCM2FCategory: Uninterruptible Power Supply (UPS)
Overview
A Pwnagotchi builder or IoT tinkerer gets a battery board that clips under a Pi Zero and carries it through power cuts. Pogo pins meet the GPIO, four screws hold it, and a magnetic battery attaches on top, with a USB Type-C port for charging.
Auto boot after a power cut makes it useful for unattended sensors that must come back on their own. No real-time clock is listed, and the custom button stops working once the Pi's serial bus interface is switched on.
Who it's for
Portable Pi Zero gadgets and field sensors that should ride through outages suit it. Builds that need the custom button alongside bus connected sensors, or need a clock, should plan around those limits.
Pros and cons
- No soldering or drivers
- Leaves all GPIO pins free
- Automatic boot when power returns
- Physical switch for storage and travel
- No real-time clock listed
- Button disabled when I2C is enabled
- Zero family boards only
Performance notes
Runtime depends on how much the Pi and its add-ons draw, which is why the plain Zero lasts longer than the faster Zero two board. Pass-through charging lets the battery refill while the Pi runs, so a mains cut produces no restart.
Specifications
| Brand | Benuomi |
|---|---|
| Dimensions & fit | |
| Item weight | 2.82 ounces |
| Board dimensions | 60 x 30 mm |
| Capacity & performance | |
| Battery capacity | 1200mAh |
| Power & efficiency | |
| Battery life | Up to 10 hours (Pi Zero W), 6+ hours (Pi Zero 2W) |
| Power input | 5V/2A USB Type-C |
| Compatibility & installation | |
| Compatible devices | Raspberry Pi Zero W, WH, 2W, Pwnagotchi |
| Warranty & support | |
| Warranty Description | 2 Year Manufacturer |
| Other details | |
| Charge time | Approximately 2 hours |
| Connection | Pogo pins on GPIO, 4 screws |
| Builtin media | Battery power module x 1, mounting screws x 4 |
Frequently asked questions
How do I install the PiSugar S on a Pi Zero?
Align the pogo pins with the Pi Zero's GPIO, tighten the four included screws and attach the magnetic battery. No soldering, drivers or software setup are needed.
Does the PiSugar S have a real-time clock?
No clock is listed. It offers automatic boot when power is reconnected and real-time power status monitoring.
Why does the PiSugar S button stop working?
The custom button function is disabled when the Raspberry Pi's I2C interface is activated.
How long does the PiSugar S run a Pi Zero?
Up to 10 hours on a Pi Zero W and 6+ hours on a Pi Zero 2W, depending on the project.