PiSugar 2 UPS Battery for Raspberry Pi Zero 1200mAh
- 1200mAh lithium polymer UPS battery
- Fits Pi Zero W, WH, 2 W and 2 WH
- Built-in RTC with timed boot
- Solder-free pogo pins, all GPIO pins stay free
- 5V in/out pads for solar or wireless charging
- 2 year warranty, 4 mounting screws included
Updated 20 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A neat battery and clock add-on for a portable or unattended Pi Zero, though run time depends on the project and is not listed.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0GYLGFYKFCategory: Uninterruptible Power Supply (UPS)
Overview
Spring-loaded pogo pins press against the underside GPIO of a Raspberry Pi Zero, so this PiSugar battery board connects without solder. It switches to battery when outside power drops, adds a real-time clock for scheduled boot, and leaves every GPIO pin free.
Seamless switchover plus a clock that holds time offline turn a Pi Zero into a portable or unattended device. Run time on battery is not stated and it fits only the Zero family boards.
Who it's for
Portable builds, field sensors and timed jobs on a Pi Zero gain power backup and a clock in one piece. Projects on a full size Pi or anything needing long unattended runtime should plan a bigger supply.
Pros and cons
- No soldering or drivers
- All GPIO pins left free
- Real-time clock with timed boot
- WebUI and phone app monitoring
- Battery runtime not listed
- Zero family boards only
- Solar panel sold separately
Performance notes
Runtime depends on how much current the Pi and its attached sensors or screen draw, since the board only stores a fixed charge. Because it charges and discharges at once, a mains cut causes no reboot, and the clock lets the Pi restart itself on a schedule.
Specifications
| Brand | PiSugar |
|---|---|
| Dimensions & fit | |
| Item dimensions | 2.6 x 1.2 x 0.4 inches |
| Capacity & performance | |
| Output Voltage | 5 V DC |
| Battery capacity | 1200mAh |
| Power & efficiency | |
| Battery Cell Type | Lithium Polymer |
| Construction & materials | |
| Enclosure Material | Plastic |
| Color | Black |
| Compatibility & installation | |
| Compatible devices | Raspberry Pi Zero W, WH, 2 W, 2 WH |
| Warranty & support | |
| Warranty Description | 2 year |
| Other details | |
| Connection | Spring-loaded pogo pins on GPIO |
| Features | RTC timed boot, WebUI and app monitoring, programmable button |
| Builtin media | Battery power module x 1, mounting screws x 4 |
Frequently asked questions
How big is the PiSugar 2 compared with a Pi Zero?
It measures 2.6 x 1.2 x 0.4 inches and matches the Pi Zero footprint for a clean stacked build.
Does the PiSugar 2 work with a Raspberry Pi 4?
No. It is made for Pi Zero W, WH, 2 W and 2 WH boards.
Do I need to solder the PiSugar 2 to the Pi Zero?
No. Align the pogo pins with the bottom GPIO and press on, which takes about 10 seconds. No soldering or drivers are needed.
Can the PiSugar 2 run from a solar panel?
Yes, its 5V in/out solder pads accept a solar panel or wireless charging pad. The panel is not included.
How do I check the PiSugar battery level?
The browser WebUI or the free iOS and Android app shows battery percentage, charge current and status.