JET JDP-17MF Floor Drill Press 17 Inch
- Drilling Capacity Wood: 4.4 inches
- Maximum Power: 0.75 hp
- Maximum Chuck Size: 0.63 inches
- Maximum Rotational Speed: 3630 rpm
Refresh date unavailable · Based on the Amazon listing and published specifications, not hands-on testing.
A mid-size floor drill press for shops that value the 16-speed range and can work within a 3/4 HP motor rather than needing JET's larger 20-inch model.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B00004T9L0Model: JDP-17MFCategory: Stationary Drill Presses
Overview
JET's JDP-17MF is a floor-standing drill press with a 17-inch swing, 16 spindle speeds and a 3/4 HP motor. It suits a home or small commercial shop drilling wood, plastic and light steel where precise speed control matters more than raw power.
The model number places it below JET's 20-inch JDP-20MF in the lineup, trading swing capacity and horsepower for a smaller footprint and 16 speed steps instead of 12. Dual 115/230V wiring lets it run on a standard shop circuit at either voltage.
- 17-inch swing
- 16 spindle speeds
- 3/4 HP, 115/230V single phase
- Floor-standing design
Who it's for
Fits a woodworker or hobbyist metalworker who wants a full floor press rather than a benchtop unit, with room to spare for the added height a floor model needs. Not the choice for a shop drilling heavy steel all day, where the higher-HP 20-inch model is the better match.
Pros and cons
- 16 speed steps for fine-tuned bit matching
- Dual voltage 115/230V wiring
- Floor-standing for stability on larger workpieces
- 3/4 HP limits it on thick steel
- Floor model needs more shop space than a benchtop press
Performance notes
The 16-speed step pulley gives closer increments between speeds than a 12-speed head, useful for matching bit size to material without landing between two settings. At 3/4 HP the motor is sized for wood, plastic and lighter steel rather than continuous heavy-gauge drilling.
Specifications
| Brand | JET |
|---|---|
| Model | JDP-17MF |
| Dimensions & fit | |
| Maximum Chuck Size | 0.63 inches |
| Item Weight | 189 pounds |
| Item Dimensions L X W X H | 23.5 × 12.8 × 66 inches |
| Capacity & performance | |
| Drilling Capacity Wood | 4.4 inches |
| Maximum Rotational Speed | 3630 rpm |
| Speed | 3630 rpm |
| Number Of Speeds | 16 |
| Power & efficiency | |
| Maximum Power | 0.75 hp |
| Amperage | 15 amps |
| Voltage | 115 volts |
| Power Source | Corded electric |
| Construction & materials | |
| Material Type | Cast Iron, Steel |
| Color | Black |
| Included components | |
| Unit Count | 1 |
| Included Components | Head Assembly, Table, Column And Bracket Assembly, Base, Owner’s Manual, Warranty Registration Card, Chuck And Chuck Key, Downfeed Handle (x3), Table Bracket Lock Handle, Table Bracket Raising Handle, M10 X 40 Hex Cap Bolts (x4), Arbor, Drift Key, Wrenches (x2) |
| Warranty & support | |
| Manufacturer Warranty Description | 5-Year Warranty (if used for commercial or industrial purposes then defaults to a 2-Year Warranty) |
| Other details | |
| Drill Type | Drill Press |
| Number Of Items | 1 |
| Additional Features | Work Light |
| Item Type Name | Floor Drill Press |
Frequently asked questions
What does the 17-inch swing mean on the JDP-17MF?
It is twice the distance from the column to the spindle center, so the press can drill to the center of a workpiece up to about 17 inches in diameter.
Can the JDP-17MF run on a standard household outlet?
It is wired for 115V or 230V single phase, so it can run on a standard 115V shop circuit or be switched to 230V.
How does the JDP-17MF compare to JET's 20-inch model?
It has a smaller 17-inch swing and 3/4 HP motor versus the JDP-20MF's 20-inch swing and 1-1/2 HP, but offers more speed steps at 16 versus 12.