JET J-2500 Floor Drill Press 15 Inch
- Drilling Capacity Wood: 0.6 inches
- Drilling Capacity Metal: 0.6 inches
- Maximum Power: 0.75 hp
- Maximum Chuck Size: 13 millimeters
Refresh date unavailable · Based on the Amazon listing and published specifications, not hands-on testing.
A compact floor press for shops tight on space that still want JET's full 16 speed steps and a 3/4 HP motor in a smaller 15-inch footprint.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B002Q9T5PEModel: J-2500Category: Stationary Drill Presses
Overview
JET's J-2500 is a 15-inch floor drill press with 16 spindle speeds and a 3/4 HP motor, the smallest-swing floor model in this JET group alongside the similarly sized J-A3816 and J-A5818.
It shares its 3/4 HP and 16-speed spec with the 17-inch JDP-17MF, but in a smaller 15-inch swing, so the main difference between the two is workpiece capacity rather than power or speed range. Dual 115/230V single-phase wiring covers standard shop circuits.
- 15-inch swing
- 16 spindle speeds
- 3/4 HP, 115/230V single phase
- Floor-standing design
Who it's for
Suits a shop or home workshop with limited floor space that still wants a floor-standing press rather than benchtop, and values the wide 16-speed range for wood and light metal work. A buyer needing to drill larger-diameter stock should look at JET's 17 or 20-inch models instead.
Pros and cons
- 16 speed steps for fine speed matching
- 3/4 HP motor
- Smaller footprint than JET's 17 and 20-inch floor presses
- 15-inch swing limits maximum workpiece diameter
- 3/4 HP is modest for heavier steel
Performance notes
The 3/4 HP motor and 16-speed head match the JDP-17MF spec for spec, so the drilling behavior on wood, plastic and light steel should be similar. The difference shows up in swing, where the smaller 15-inch reach limits the largest workpiece diameter it can center.
Specifications
| Brand | JET |
|---|---|
| Model | J-2500 |
| Dimensions & fit | |
| Maximum Chuck Size | 13 millimeters |
| Item Weight | 167 pounds |
| Item Dimensions L X W X H | 54 × 20 × 10.5 inches |
| Capacity & performance | |
| Drilling Capacity Wood | 0.6 inches |
| Drilling Capacity Metal | 0.6 inches |
| Maximum Rotational Speed | 3630 rpm |
| Speed | 3630 rpm |
| Number Of Speeds | 16 |
| Power & efficiency | |
| Maximum Power | 0.75 hp |
| Amperage | 9 amps |
| Voltage | 115 volts |
| Power Source | Corded electric |
| Construction & materials | |
| Material Type | Cast Iron, Steel |
| Color | Black |
| Included components | |
| Unit Count | 1 |
| Included Components | Head Assembly, Table, Column, Base, Hardware |
| Warranty & support | |
| Manufacturer Warranty Description | 2 Year |
| Other details | |
| Maximum Torque | 14.1 Nm |
| Torque | 14.1 Nm |
| Drill Type | Drill Press |
| Number Of Items | 1 |
| Additional Features | Portable |
| Item Type Name | Drill Press |
Frequently asked questions
How does the J-2500 differ from JET's 17-inch JDP-17MF?
Both run 16 speeds at 3/4 HP, but the J-2500 has a smaller 15-inch swing versus 17 inches.
Does the J-2500 run on household power?
It is dual-wired for 115V or 230V single phase.
Is the J-2500 a benchtop or floor model?
It is a floor-standing drill press.