BTECH UV-50X2 Dual Band Mobile Ham Radio 50W
- Dual band: 144 MHz or 430 MHz main band
- Watches up to 3 other frequencies or channels
- 200 channels
- 13.8 volts DC
- IPX2 splash protection
- RJ45 mic port plus K1 audio adaptor
- 7.5 x 5.7 x 1.85 inches
Updated 25 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A dual band mobile for a truck or home desk that watches several channels and takes common aftermarket audio accessories. Antenna and the base power supply are extra, and splash protection is light.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B06XK83VRVModel: UV-50X2Category: Two-Way Radios
Overview
A truck cab or a home radio desk can host this BTECH mobile, which wires into a vehicle with the included hardware or runs from an optional power supply as a base. It listens on its main band while watching up to three more.
Wide audio accessory support plus multi-channel watch makes it flexible for both mobile and base setups. You still need to buy an antenna and, for home use, the power supply, and splash protection is minimal.
Who it's for
Operators building a first mobile or base station get a dual band rig with mic and brackets. Those wanting tri-band coverage or a sealed radio for open vehicles should look elsewhere.
Pros and cons
- Mobile or base use
- Watches several channels
- Bundled adaptor for audio accessories
- Speaker mic and brackets included
- Antenna not included
- Power supply for base use extra
- Light splash protection only
- Output power missing from the specs
Performance notes
Coverage depends mainly on the antenna you add and its height, and the recommended magnetic mount gives a roof position without drilling. Watching several channels means the radio samples each in turn, so you can follow a repeater and a simplex frequency together.
Specifications
| Brand | BTECH |
|---|---|
| Model | UV-50X2 |
| Dimensions & fit | |
| Item Dimensions D x W x H | 7.5 x 5.7 x 1.85 inches |
| Capacity & performance | |
| Frequency Range | FM, VHF, UHF |
| Power & efficiency | |
| Voltage | 13.8 volts DC |
| Compatibility & installation | |
| Compatible Devices | Radio devices with a UHF antenna connector |
| Other details | |
| Tuner Type | FM, VHF, UHF |
| Number of Channels | 200 |
| Waterproof Rating | IPX2 |
| BuiltIn Media | UV-50X2 radio, RJ45 to K1 audio adaptor, speaker mic, DC cable, radio and mic brackets, mounting hardware, user guide |
| Additional Features | Watches up to 3 other channels, VHF-VHF or UHF-UHF |
Frequently asked questions
Is the BTECH UV-50X2 a tri-band radio?
No. It operates with either 144 MHz or 430 MHz as the main band.
Does the BTECH UV-50X2 include a power supply?
No. For base use at home or in the office, the RPS-30M power supply is optional and not included. A DC cable for vehicle wiring is included.
Which antenna should I use?
The Nagoya UT-72 Magnetic Mount Antenna is recommended, sold separately.
How is it programmed from a PC?
The PC04 FTDI Cable is recommended for computer programming.