Paragon SC3 Fiber Kiln
Refresh date unavailable · Based on the Amazon listing and published specifications, not hands-on testing.
A compact fiber kiln that runs on a standard outlet and reaches 2000F, a solid choice for small glass or enamel work rather than volume ceramics production.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0CF6Q5XQCCategory: Kilns
Overview
The Paragon SC3 is a fiber-insulated kiln with a compact 7 3/4 by 8 by 7 3/4 inch chamber, running on a 120 volt 15 amp circuit up to 2000 degrees Fahrenheit. It ships with a Sentry 3 Key control board for setting firing programs rather than a plain on-off switch.
Fiber insulation heats up and cools down faster than brick, which is why small fiber kilns like this one are popular for glass, enamel and small ceramic test work rather than large production runs. A 15 amp draw on a standard 120 volt circuit means it can run without a dedicated high-amperage line, unlike many larger kilns.
- 2000F maximum temperature
- 7 3/4 x 8 x 7 3/4 inch chamber
- 120v 15amp, standard household circuit
- Sentry 3 Key control board
Who it's for
Suits glass, enamel or jewelry work needing a small, quick-cycling kiln on a standard household circuit. Not sized for production ceramics or large batches, given the roughly 8 inch chamber.
Pros and cons
- Runs on a standard 120v 15 amp circuit
- Sentry 3 Key programmable control board
- Fast-cycling fiber insulation suited to glass and enamel
- Compact chamber, not sized for production ceramics
Performance notes
Fiber insulation reaches temperature and cools faster than a firebrick kiln of similar size, which suits shorter glass and enamel cycles. The Sentry 3 Key board programs the ramp and hold instead of leaving timing to a manual switch, and the 15 amp 120 volt draw keeps it usable on a standard circuit.
Specifications
| Brand | Paragon |
|---|
Frequently asked questions
What size is the Paragon SC3's chamber?
It measures 7 3/4 inches wide, 8 inches deep and 7 3/4 inches high.
Does the Paragon SC3 need a dedicated high-amperage circuit?
No, it runs on a standard 120 volt 15 amp circuit.
What control board does the Paragon SC3 use?
It comes with a Sentry 3 Key control board for programming firing cycles.