3D Printing Filament - page 2

JAYO PETG Filament 1.75mm 1.1 kg

A tough PETG on a larger, reusable spool with tight tolerance for brackets, clamps and printer parts. Print temperature guidance is not listed.

SUNLU ABS Filament 1.75mm 1 kg

A tough ABS for functional parts that need heat and impact resistance, with clear print settings on the listing. ABS needs a hot bed and does better in an enclosed printer.

iSANMATE ASA Filament 1.75mm 1 kg

A UV and weather resistant ASA for outdoor functional parts, with clear print settings. It needs an enclosure, a hot bed and glue to print well.

Bambu Lab ABS Filament 1kg Spool

Polymaker TPU 95A Flexible Filament 0.75 kg

A fast printing flexible TPU for tough, elastic parts like bumpers and wearables. It is softer than rigid filaments, so stiff parts need a different material.

JAYO PLA Filament 1.75mm 1.1 kg

Polymaker Panchroma Matte PLA Filament Refill 1 kg

SUNLU PLA+ 2.0 Filament Refill 4 kg

Creality PETG Filament Bundle 4 kg

A tough, glossy PETG for makers who want parts that flex without snapping and a mixed color set. Print and bed temperatures are missing, so dial in settings with a test print first.

Bambu Lab PETG Basic Filament 1 kg Spool

Creality TPU 95A Flexible Filament 2 kg

A flexible TPU for gaskets, phone cases and wearable parts, dried and sealed for clean printing. It works most reliably on a direct drive extruder.

SainSmart PEBA 90A Flexible Filament 1 kg

A lighter, springier alternative to TPU for drones, sports gear and wearables, printing faster too. It needs a dual gear extruder and the listing gives no temperatures.

Bambu Lab PLA Silk+ Filament 1kg

Creality Hyper ABS Filament 1.75mm

Siraya Tech Fibreheart PPA-CF Filament 1 kg

An engineering filament for stiff, heat-resistant functional parts such as automotive and machine components. Filament diameter and print temperatures are missing from the listing, so confirm both before ordering.

Creality TPU 95A Flexible Filament 1 kg

A black flexible TPU for seals, bumpers and wearables that needs a direct drive extruder for the most reliable prints. The tolerance in the title is tighter than in the bullets.

ANYCUBIC PLA Plus Filament 1.75mm 1 kg

A tough, red PLA+ for FDM printers that auto identifies itself in an Anycubic ACE Pro. Spool size and print temperatures are not listed, so check settings before printing.

Kingroon PETG Filament 10 kg

A bulk PETG supply with published heat and strength figures for functional and outdoor parts. The tolerance figure differs between title and bullets.

ELEGOO Rapid PLA Plus Filament 1.75mm 1 kg

OVERTURE PLA Plus Filament 1.75mm 1 kg

ELEGOO Matte PLA Filament 1.75mm 1 kg

SUNLU PLA Plus Filament 1.75mm 1 kg

ELEGOO PLA Plus Filament 1.75mm 2 kg

OVERTURE ASA Filament 1.75mm 1 kg